MultiTech Developer Resources » Topic: MTCDP-EV3 Verizon registration procedure

MTCDP-EV3 Verizon registration procedure

Tagged: MTCDP EV3 registration Verizon

This topic has 1 reply, 2 voices, and was last updated 11 years, 7 months ago by Lonny Knudson.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
March 26, 2015 at 4:54 pm #6900

Herraiz Stéphane
Participant

Hi,
We found this document for Verizon registration on MTCDP-EV2 :

The registration command “AT+CDV*22899;” is working but we need a way detect grammatically if the device EV3 is registered or not.
Do you have an AT command to test this Verizon registration?

Thanks

Best Regards

March 27, 2015 at 9:49 am #6908

Lonny Knudson
Blocked

Hi Herraiz,
The command to check registration on the -EV3 is AT+CREG?
A response of +CREG: 0,1 or +CREG: 0,5 indicates that the modem is registered.

Here is a link to the Verizon activation procedure for -EV3 products:
http://www.multitech.com/activation-guides/verizon-wireless-activation-procedure-ev3-and-c2-devices-s000606.pdf

Here is a link to the AT command manual for -EV3 products:
http://www.multitech.com/manuals/s000546.pdf
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You cannot reply to this topic.