MT9234MU-CDC-XR
- This topic has 1 reply, 2 voices, and was last updated 8 years, 8 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Mike McNeil.
Ian FindlayWe want to connect our modem to win-911 running on a virtual machine operating 2012R2.Anyone any ideas ,I read where it can be done using a proprietary software. Has any body achieved this and what software did yoiu use.
Cheers Ian
Mike McNeilHello Ian,
The MT9234MU-CDC-XR does install on 2012R2 but we have not tested the VM version. You will want to properly install the modem on the host PC then install on the VM. Verify you can see the modem in Device Manager in both the host and VM machines.
The current drivers from the MultiTech website contain TAM support so after the modem is properly installed the next step would be to properly set up Win911 to see the modem.
http://www.multitech.com/models/93537298LF
If you have further questions you may want to create a support case at https://support.multitech.com
Regards,
Mike