mDot Firmware 0.0.15

[Daniel Bell]

Hi,

The AEP Firmware page shows that “Also, 1.0.33 requires mDot firmware version 0.0.15 or later for LoRa compatibility.”.

However I can’t find that version anywhere on the site. Is there a link for it?

Thanks,

Dan

[Tim Gunn]

Hi Daniel,

we have new firmware releases for AEP Conduit (1.0.33) & mDot (0.1.2). They are both available from the .net site.

http://www.multitech.net/developer/software/aep/upgrading-the-aep-firmware/
http://www.multitech.net/developer/software/mdot-software/mdot-firmware-upgrade/

If you upgrade to 1.0.33 AEP, you’ll need to start using the latest version of libmDot on mbed.

[Andrew Lindsay]

When mDot firmware is referred to, is this just the AT command interpreter and not some low level code that the mDot needs in order to function?
Reason I’m asking is that i use the mbed environment to reprogram the mDot so this appears to effectively overwrite the mDot firmware here.

Thanks

Andrew

[Brandon Bayer]

Andrew,

Yes, “mDot firmware” is the AT Command Firmware that ships on the mDot. For custom mbed development, you’ll just need to use libmDot rev. 6 or later (which is what the AT Command Firmware uses under the hood).

-Brandon

[Andrew Lindsay]

Thanks Brandon, much appreciated.

Andrew

[Author]

Posts