Install the AEP firmware on Multitech gateway IP67

[GatewayIOT]

Hi ..

I bought Multitech conduit ip67 model: MTCDTIP-LEU1, this model have both AEP and MLinux.

I made a Flashing mLinux Firmware instructions cover both upgrading mLinux to a newer version and converting an AEP model into a mLinux model.

( Example commands for upgrading / migrating:
mkdir /var/volatile/flash-upgrade
cd /var/volatile/flash-upgrade
wget -O uImage.bin http://www.multitech.net/mlinux/images/mtcdt/5.0.0/uImage–4.9.87-r9.2-mtcdt-20190618233259.bin
wget -O rootfs.jffs2 http://www.multitech.net/mlinux/images/mtcdt/5.0.0/mlinux-base-image-mtcdt-20190618233259.rootfs.jffs2
touch /var/volatile/do_flash_upgrade
reboot )

After that done, I lost the AEP firmware. SO Please, how I can or what steps I have to do to download the AEP firmware again, and in the same time keep the mlinux. As it previously was like that.

Note: The only way I can access to my gateway is by SSH or putty.

[Mike McNeil]

Customer has created a Support Portal case regarding this issue.
Regards.

[Author]

Posts