I’m network beginner I meet some difficulties to setup the conduit to access to internet.
” In order to update the AEP to operate using DHCP on your local LAN you will need to configure it using the web interface
I assume that your network uses DHCP and you will want to configure the AEP network interface to obtain an IP through DHCP”
How can I do it? I read Getting started with AEP, but it’s not clear for me…
Currently my conduit is set like this :
Network interface: eth0
Direction: LAN
Mode: static
IP adress: 192.168.2.1
network mask: 255.255.255.0
DHCP configuration:
Enable check
Gateway: 192.168.2.1
Lease Range Start: 192.168.2.100
Subnet: 192.168.2.0
Mask: 255.255.255.0
Lease Time (dd-hh-mm): 01-00-00
Lease Range End: 192.168.2.150
If someone can help me thank you.