DFRobot Leonardo w/XBee Socket and MDot

[Peter Keegan]

I would like to know if it is possible to use the following MDot Modules with the DFRobot Leonardo w/XBee Socket.

– MTDOT-915-X1-SMA 915 MHz XBee LoRa SMA
– MTDOT-915-X1P-SMA 915 MHz XBee LoRa SMA w/Programming Header

– https://www.dfrobot.com/wiki/index.php/DFRobot_Leonardo_with_Xbee_R3(SKU:DFR0221)” title=”DFRobot Leonardo Wiki

The only reason I have included the MDot w/Programming Header is I intend to order the MTKIT-LORA-915 – Conduit LoRa Accessory Kit 915 MHz. I guess if the Programming Header interferes with the Leonardo board I would use header extension.

It seems like a nice match, but I have not seen anyone mention using it.

Also if there is a preferred Arduino XBee Shield for the UNO.

Thank You

• This topic was modified 7 years, 5 months ago by Peter Keegan. Reason: The link did not seem to appear

[Andrew Lindsay]

If you are only using the factory firmware or programming the mDots in a UDK dev board then most xbee based boards should work. As I’ve not tried this myself, I’m only comparing the pinouts.

thanks

Andrew

[Author]

Posts