convert to mpower firmware issue
- This topic has 1 reply, 2 voices, and was last updated 5 years ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: mLinux Model › convert to mpower firmware issue
Mike McNeil.
GatewayIOThi guys ..
I have multitech ip67 base station. mistakenly I did the following steps on it:
mkdir /var/volatile/flash-upgrade
cd /var/volatile/flash-upgrade
wget -O uImage.bin http://www.multitech.net/mlinux/images/mtcdt/5.2.1/uImage–4.9.87-r9.2-mtcdt-20190618233259.bin
wget -O rootfs.jffs2 http://www.multitech.net/mlinux/images/mtcdt/5.2.1/mlinux-base-image-mtcdt-20190618233259.rootfs.jffs2
touch /var/volatile/do_flash_upgrade
reboot
after that done, the gateway converted to mlinux, and I lost access to web user interface. the gateway totally convert to mlinux 5.2.1
Hence, how i can set my gateway to its previous state? I understand that I have to install mpower firmware. so i try to do that but it is not working with me. so please any help ??
Regards
Mike McNeilCustomer has created a Support Portal case regarding this issue.
Regards.