Conduit with Lora / GPS and GPIO
- This topic has 2 replies, 3 voices, and was last updated 9 years ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: AEP Model › Conduit with Lora / GPS and GPIO
Hello guys,
I’ve been playing with the conduit sith Lora mcard for some days now.
But i’ll need to integrate it in a more complex environment in a near future.
I’ll need to add 1 gpio (maybe more later on) and a gps.
I know there is a gpio accessory card, and eventually a gps one in the pipe. But there is only 2 accessory card slots…
So…. whould you have any recommandation to me?
GPS through USB ?
Thanks for your help
Nicolas,
Yes, it does sound like a USB GPS receiver would work well for you!
-Brandon
Nicolas,
We are looking into the same solution for one of our applications. May I ask which USP GPS receiver you ended up using and if you have any suggestions?