Conduit Reset Problem – IoT Starter Kit

Home › Forums › General › Conduit Reset Problem – IoT Starter Kit

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 6, 2021 at 11:09 pm #31972
    jackytesting1
    Participant

    Hello, I am currently trying the Conduit® IOT Starter Kit. And I have reset the Conduit, therefore, according to the manual: https://www.multitech.com/support/resolutionid/5080639
    I have to set the LoRa Frequency Subband=1, but I cannot find where to configure this in the portal (web browser http://192.168.2.1)

    Please advise me, thank you !

    July 7, 2021 at 3:05 pm #31973
    Steve Kovarik
    Moderator

    Hello Jacky

    To configure the Conduit ‘Frequency Sub-band’ log into the Conduit web UI and select the “LoRaWAN”, “Network Settings” tab.
    With the ‘LoRa Mode’ set to “Network Server” the ‘Frequency Sub-band’ setting is on this page under ‘LoRaWAN Network Server Configuration’.
    The Frequency Sub-band setting is valid if using US915 channel plan.
    For example if you are using EU868 (for Europe) there is no ‘frequency Sub-band’ setting and that part can be ignored.

    -Best Regards

    July 13, 2021 at 10:27 pm #31978
    jackytesting1
    Participant

    Got it, thank you!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.