Conduit mLinux OTAA
- This topic has 2 replies, 2 voices, and was last updated 6 years, 10 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: mLinux Model › Conduit mLinux OTAA
Miha Sukic.
johann van NiekerkHey Guys can the conduit mlinux version work in OTAA mode in private network node->conduit->PC?
johann van NiekerkSo managed to get this working 90% of the way.
the device registers on the conduit via OTAA process and i receive messages sent from node. my problem is i only receive a messages anywhere from 5- 30 minutes and my node is set to transmit every 60 seconds for testing. I think that the conduit is listening to all the bands and not just EU868 band since the same node and code worked fine when the conduit was setup a pckt forwarder to TTN.
Miha SukicI was experiencing the same problem when I set up nodes manually to the Network Server.
When I did it with OTAA process with adding device and then NS created node parameters on its own. the other problem can be with FCnt setup which I set to FCnt Check: Set to Zero. It also depends on which NS you are using.