Class C end-device cannot join the network
- This topic has 0 replies, 1 voice, and was last updated 6 years, 9 months ago by
.
Viewing 1 post (of 1 total)
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: AEP Model › Class C end-device cannot join the network
Tagged: AEP, cannot schedule packet, class C, Conduit, LoRaWAN
lorawan2016.
lorawan2016Hello,
I have got a problem using Multitech Conduit gateway, AEP model and firmware version 1.4.1.
See the error messages displayed in the LoRa logs
mtcdt user.warn lora-network-server: Node has not checked in, or packet is already scheduled, cannot schedule packet
Then the consequence is that the end-device can’t join the network using class C. The end-device is based on Microchip RN2483 module with class C firmware on it and it’s configured with data rate 5 and the gateway is set to SF7. I have updated these parameters but it doesn’t help. The network key is the same in the end-device and the gateway using join OTA. Restart of both the end-device and the gateway doesn’t help.
Kindly help is needed urgently.