CDP Flash stability
- This topic has 1 reply, 2 voices, and was last updated 12 years, 8 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Home › Forums › MultiConnect OCG › CDP Flash stability
Tagged: Flash Stability Power
Jesse Gilles.
Campbell ElderWhat is the life of the onboard Flash in the CDP if used in a vehicle application where the CDP is enabled using the ignition source.
I.E its powered and un-powered on the key.
Will the life be reduced?
Jesse GillesThis should not be an issue and would not reduce the life of the flash. The flash life is only affected by erase/write cycles and powering the device up and down should not affect it.
Jesse