Can't establish internet connection

Home › Forums › Conduit: mLinux Model › Can't establish internet connection

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 16, 2016 at 1:42 am #16097
    Adam Neřold
    Participant

    Hi,
    I have Conduit mLinux model. I have it connected to my PC directly trough ethernet cable. Conduit’s IP is 192.168.2.1 and my PC’s 192.168.2.2. On my PC I have shared wifi connection to eth but I can’t connect to internet on my conduit.

    If I ping Conduit from my PC it goest just fine but when I try to ping from Conduit to PC it doesn’t work. Is some problem here?

    Thanks,
    Adam

    December 16, 2016 at 1:46 am #16098
    Adam Neřold
    Participant

    Also, my /etc/network/interfaces looks like this:

    auto eth0
    address 192.168.2.1
    netmask 255.255.255.0
    gateway 192.168.2.2

    December 16, 2016 at 7:54 am #16100
    Jeff Hatch
    Keymaster

    Adam,

    Could you run the “route -n” command on the Conduit and copy the output to this thread? Also, do you have a PPP interface configured?

    Jeff

    December 16, 2016 at 8:09 am #16101
    Adam Neřold
    Participant

    Jeff,

    Thank you for your reply. It took me few hours but I managed to solve it myself. I had badly configured internet sharing on my PC, nothing bad with the conduit. Again, thanks for your reply,

    regards,
    Adam

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.