Cannot access the AEP Interface

Home › Forums › General › Cannot access the AEP Interface

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 7, 2018 at 12:22 pm #26953
    Damon Lora
    Participant

    Hi all,
    I am using MTCDT-LVW2-247A (MultiConnect Conduit).
    I cannot go into AEP Interface (192.168.2.1) after my first time access the AEP nnterface and reboot.
    I checked hardware from PC to gateway E-NET is OK, but PC cannot get the IP address from gateway.

    If anyone have any suggestion, please advise me.
    Thank you very much.

    December 7, 2018 at 12:55 pm #26954
    Jason Reiss
    Keymaster

    DHCP server is not enabled by default. Assign the PC an address such as 192.168.2.100 and set the gateway to 192.168.2.1.

    December 8, 2018 at 4:00 am #26955
    Damon Lora
    Participant

    Hi Jason,

    I can access it now.
    Thank you very much.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.