AEP Lease Time
- This topic has 2 replies, 2 voices, and was last updated 7 years, 10 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: AEP Model › AEP Lease Time
Hi, The help on AEP for lease time doesn’t quite cut it.
Lease Time (dd-hh-mm) 60-00-00 (60 days) Amount of time until a successful join expires.
1. How do you disable this set at 00-00-00?
2. What happens when lease expires are uplink messages form joined nodes ignored?
Thanks
00-00-00 will disable the expiration of joins.
When lease is expired the uplinks are ignored and no downlinks to the device are transmitted.
Device could detect lack of network response and initiate join sequence.
Inspired by DHCP lease-time, not sure this feature has any real use case.
Appears to be more of a nuisance for most.
Jason, thanks & agreed … Appears to be more of a nuisance for most.