Home
Privacy Statement
Terms of Use
Sitemap
News
Products
Conduit Platform
Conduit 300
mCard Accessory Cards
Installing an mCard Accessory Card
MTAC-XDOT
xdot-util script
MTS-IO-SYSFS
MTAC-GPIO
MTAC-GPIO Electrical Requirements
MTAC-GPIO Connector and Cable Pinout
MTAC-GPIO Mechanical Drawing
MTAC-GPIO Hardware Specifications
MTAC-GPIO Power Draw
MTAC-GPIO LED Descriptions
MTAC-GPIO Regulatory Information
MTAC-MFSER
MTAC-MFSER Connector Pinout and LEDs
MTAC-MFSER-DTE Mechanical Drawing
MTAC-MFSER-DCE Mechanical Drawing
MTAC-MFSER Hardware Specifications
MTAC-MFSER Power Draw
MTAC-MFSER Regulatory Information
MTAC-LoRa Cards
MTAC-LoRa Antenna Specifications and Connector
MTAC-LoRa Cards Mechanical Drawing
MTAC-LORA Power Draw
MTAC-LoRa Hardware Specifications
MTAC-LoRa Regulatory Information
MTAC LoRa-H Regulatory Information
MTAC-003 (LoRa 3) Card
MTAC-ETH
Getting Started with MTAC-ETH card
MTAC-ETH Connector
MTAC-ETH Mechanical Drawing
MTAC-ETH Hardware Specifications
MTAC-ETH Power Draw
MTAC-ETH Regulatory Information
Electromechanical Specifications
Conduit
Micro SD Card Details
Conduit IP67 Base Station
Updated LED Information
Antenna Bracket (Optional)
Alternate LoRa Antenna
L4E1 Cellular Radio Firmware Update
Conduit Base Station and Conduit Base Station Series 200
Conduit AP
mDots and xDots
xDot
mDot
mDot Box & EVB (MTDOT-BOX/EVB)
Internal Sensors
SocketModem MTQ and MTQN
SocketModem MTQ
SocketModem MTQN
MultiConnect OCG
MultiConnect OCG-D
Installing a SIM Card
Removing a SIM Card
MTCDP I/O Control using mts-io
GPIO Connector and Cable information
GPIO Interface Electrical Requirements
Regulatory Info for OCG-D
Frequency Bands for MultiConnect-OCG-D
Max radio frequency power for MultiConnect-OCG-D
Safety Notices for OCG-D
MultiConnect OCG-E
MT100EOCG I/O Control using mts-io
Hardware Specifications
MultiConnect OCG-E with MTPCIE
Configuring the MTPCIE-DK1 Developer Board
Calibrating Wi-Fi and Programming the MAC Address
Creating a PPP Connection
Setting Wi-Fi Access Point with an MT100EOCG and an MTPCIE Bluetooth/Wi-Fi
Using an MT100EOCG with an MTPCIE Bluetooth/Wi-Fi Device as Wi-Fi
Setting up Bluetooth with an MT100 EOCG and an MTPCIE
Setting up an External USB to MTPCIE Bluetooth Serial Interface
MultiConnect OCG Break-Out Board
Cables
Serial Debug Cable Diagram
How to Setup Serial Console Cable
Software
DeviceHQ
Account API
Account API – Format
Account API – Authentication
Account API – Routes
Account API – Search and Pagination
Account API – HTTP Codes
Account API – Examples
Example – Test
Example – Info
Example – Account
Example – Users
Example – Devices
Example – Update a Device
Example – Network
Example – Signal Strength History
Example – Check-in History
Example – LoRa Network
Example – Logs
Example – Configs
Example – Register
Account API Extensions for Task Management
New End Points
Examples
Detailed Request Examples
Create an Install App Task
Create an Install App Task on a Device, Specifying App Version
Create an Install App Task on a Device, Specifying App Version and Configuration
Create an Uninstall App Task on a Device
Create an Upgrade Firmware Task on a Device
Create an Upgrade Radio Firmware Task on a Device
Create an Apply Configuration Task on a Device
Create an Apply App Configuration Task on a Device
Retrieve Detailed Information about a Single Task on a Device
Cancel a Task Created for a Device
Delete a Task on a Device
Retrieve Detailed Information about Apps Installed on a Device
Retrieve Detailed App Information
Retrieve Tasks for a Device
Retrieve a List of Apps Belonging to Your Account
Retrieve a List of Device Firmwares that are Public or Belong to Your Account
Retrieve a List of Radio Firmwares that are Public or Belong to Your Account
Retrieve a List of Device Configurations Belonging to Your Account
Error Responses
Sensors
mPower
LoRa Configuration
LoRaWAN Device Provisioning
Configurations for mPower
Reset Button Behavior for mPower
Creating a Custom Application
Conduit mPower API
How to Create Certificates and CA Certificates
Connect Node-RED to Any Cloud Service’s REST API
Updating Packages
UE Mode of Operation (CEMODE) issue for AT&T
mPower Firmware Changelog
mPower Resolutions
mLinux
About mLinux
Getting Started with mLinux
Commissioning for mLinux Devices
Configure Modes
Upgrading mLinux
Using mLinux
Flashing mLinux Firmware
Setting administrative passwords
Log in as Admin Post-Production
Changing the password
Sudoers file
Naming the Device
LoRa Configuration
Upgrade LoRa Server & Packet Forwarder
Cellular Connection
LSP3 device (Sprint LTE) activation
Start Cell Connection on Boot
OPKG Package Manager
Enabling Receive Diversity on MTCDT-H5
Hardware I/O Usage
Using Accessory Cards with mLinux
MTAC-GPIO Usage
MTAC-MFSER Usage
MTAC-LORA/MTAC-003 Usage
MTAC-ETH Usage
bluez5 PAN Setup
bluez5 Serial Setup
Pairing
Bluetooth
Bluetooth Low Energy
GPS/GNSS
NTPD
GPSD
Wi-Fi Access Point
Wi-Fi Station
Ethernet Bonding
Included Software Utilities
DHCP & Router Scripts
I/O Control Using mts-io
SMS Messaging Using sms-utils
radio-query Usage
radio-cmd Usage
U-boot Linux Utility
Reset for mLinux (Factory Defaults or Reboot)
Php-fpm (New fast CGI server)
Ethernet Hotplug
mLinux glossary
Using LXFP to Upgrade Telit Firmware
Using UXFP to Upgrade Telit Firmware
Supercap Feature
Application Development
C/C++ Toolchain
Python
Node.js Examples
Debugging a C/C++ Application
Getting Started with MTCDT-246L (using mLinux)
Building Images
Introduction to Yocto Project
Building a Custom Linux Image
Using OPKG with mLinux
mLinux Changelog
LoRa Network Server Changelog
mLinux Resolutions
mDot
Flashing mDot Firmware
Peer-to-Peer
AT Command Getting Started Guide
Connecting to a Network
Network Join Modes
mPower Software
MTR, Conduit, and Conduit 300 API Reference
Requests
Making Requests
Verify the Hardware Version
Confirm the Current State of DHCP
Retrieving the Current DHCP Setting
Using HTTP to Send SMS
Find the IP Address of a Remote End Point
Retrieving SMS messages
Logging In
Specifying Credentials When Logging In
Logging Out
Commissioning
Retrieving Session Information with the whoami Command
Passing JSON Data
Saving Changes
Selecting a Version of an API Call
Element Descriptions
URI Parameters
Firewall Summary
CA Certificates
Responses
Success Responses
Error Responses
Collection Endpoints
apps
appStore
alert
autoReboot
autoDialout
backOffTimers
battery
bluetooth
bluetoothLowEnergy
bootloader
brand
btDevices
cacertificates
callHome
cellTimeSync
certificate
customApps
customAppsConfig
ddns
devices
dhcp
dns
docker
filters
firewall
gps
greTunnels
ipPipes
ipsecTunnels
lan
lldp
log
lora
loraNetwork
MQTT broker
MQTT bridge
nat
ni
nodeRed
ovpn
packages
passwordComplexityRules
policy
ppp
radius
remoteAccess
resetButton
remoteManagement
routes
saveAndRestore
scada – BACnet
secureProtocols
selfDiagnostic
serial
serialModemPassthrough
sms
smtp
snmp
sntp
syslog
system
trustedIp
users
waninfo
wanmngr
wifi
Commands
passwd
Radio
Statistics
dns
eth
bluetooth
remoteManagement
ethHistory
ethTotal
gps
gre
ipsec
lan
modbus
ppp
pppHistory
pppTotal
radio
serial
service
status
wlan
wlanHistory
wlanTotal
Appendix
Using curl for Commissioning
Using Curl to Log In
Using Curl to Enable PPP
Using Curl to Save the Current Configurations and Reboot
Using Curl to Add a Firewall DNAT Rule
Using Curl to Add a Firewall Filter Rule
Using Curl to Delete a Firewall Filter Rule by Name
Using Curl to Delete a Firewall Filter Rule by Index
Using Curl to Send an SMS
Using Curl to Delete an SMS
Using wget to Send SMS
Using Curl to Manage CA certificates
Using Curl to Manage Telit Radio Firmware Upgrade
Using Curl to Upload and Check Firmware Upgrade File
Find out the Hardware Version
API Changes
Modbus Query Information
mDot Box/EVB
Device Startup
View Data
Select Region
LoRa Demo
Configuration Mode
Survey Single
Survey Sweep
Survey GPS
Survey Data File
Data Packet Format
Update firmware using binary file
Glossary
LoRa
Introduction to LoRa
Listen Before Talk
Spectral Scan
Configuring Two LoRa Cards on a Conduit
Class C Walkthrough
Glossary
Running Basic Station on Conduit
LoRaWAN Multicast Setup and Firmware Updates OTA
MTAC-LORA-2G4-3
Installing Chirpstack Bridge
Cloud Connector
Packet Filtering
LoRa Network Server
MQTT Messages
Networking Conduits
Conduit mPower: LoRa Communication and Node-RED
Conduit AEP: Advanced LoRa Configuration
Conduit AEP: LoRa Use With Third-Party Devices
Conduit AEP: Convert to Basic Packet Forwarder
Getting Started with LoRa Conduit AEP (LoRa Configuration)
Managing device list through API
Getting Started with LoRa Conduit mLinux (LoRa Configuration)
Conduit mLinux: LoRa Communication
Conduit mLinux: Advanced LoRa Configuration
Conduit mLinux: LoRa Use With Third-Party Devices
Conduit mLinux: Convert to Basic Packet Forwarder
Conduit mLinux: Configure for The Things Network
Troubleshooting LoRa Communication
Conduit Access Point: Getting Started with LoRa
LoRa Resolutions
SocketModem MTQ
Flashing MTQ Firmware
CoreCDP
Prerequisites
Getting Started
Application Development
Using BitBake
NAND Flash Programming
Development Examples
Accessing Hardware Interfaces
Creating a Custom Image
Writing BitBake Recipes
Customizing Bitbake Recipes
Setting Up a Package Feed
Technical Articles
I/O Control using mts-io Package
Setting the Time Zone, Date, and Time
Command-line Utility for GPS
Improving SD card performance
OCG Scripts
PPP Masquerading and Firewalling
Establishing a Cellular Data (PPP) Connection
GPS Receiver Overview
SMS Messaging using sms-utils Package
Appendix
Bootstrap/U-Boot Recovery
CoreCDP File Paths
U-Boot Linux Utilities
References
Release Notes
CoreCDP 2.3.4 Release Notes
CoreCDP 2.3.3 Release Notes
CoreCDP 2.2.2 Release Notes
FaxFinder
Ruby Example Code
Python Example Code
Perl Example Code
Php Example Code
C# Example Code
C ++ Example Code
Java Example Code
Web Services API
Faxing APIs
Aborting a Fax Entry
Rescheduling a Fax Entry
Scheduling a Fax
User APIs
Viewing User Information
Verify User
Adding a User
Editing a User
Contact and Group APIs
Adding New Contacts
Viewing Contacts
Editing Contacts
Deleting Contacts
Viewing Groups
Editing Groups
Deleting Groups
Viewing Contact IDs
Viewing Group IDs
Creating a New Group
Cover Page API
Viewing Cover Pages
Fax Status APIs
Viewing Channel Status (FF240-IP only)
Viewing Modem Status (FF240, FF440, FF840)
Viewing Inbound Fax Status
Viewing Outbound Fax Status
Viewing Modem, Channel, System, Printer, and Share Status
Fax Log APIs
Viewing Inbound Fax Logs
Viewing Outbound Fax Logs
Viewing Call Log
Viewing Inbound or Outbound Log Count
FaxFinder Configuration APIs
Editing T38 Settings (FF240-IP only)
Viewing Inbound Routes
Deleting Inbound Routes
Editing Inbound Routes
Viewing Store and Forward (T.37) Settings
Editing Store and Forward (T.37) Settings
Viewing Modem Settings (FF240, FF440, or FF840)
Editing Modem Settings (FF240, FF440, or FF840)
Viewing SIP Settings (FF240-IP only)
Editing SIP Settings (FF240-IP only)
Viewing T38 Settings (FF240-IP only)
Viewing Add Global Contacts Status of Non-Admin Users
FaxFinder Information APIs and Elements
General Status Codes
Schedule Fax Element
Contact Element
Group Element
Viewing Information about the FaxFinder
Fax Entry Element
User Element
Inbound Routing Fax Element
T.37 Advanced Usage
iSMS
iSMS Send API
iSMS Receive API
iSMS Query API
iSMS & Nagios IT Management System
Powering Down Any -H5, -EV3, -C2, and -G3 Device
Downloads
RED Compliance
Forums
Source Code
MultiTech.com
Topic Tag: Cellular Verizon APN
Search for:
Home
›
Forums
›
Topic Tag: Cellular Verizon APN
Viewing topic 1 (of 1 total)
Topic
Voices
Posts
Last Post
Setting the apnString for the PPP connection.
Started by:
Ajay K
in:
Conduit: AEP Model
2
3
9 years, 7 months ago
Ajay K
Viewing topic 1 (of 1 total)
User
Register
Log in
Random Posts
CoreCDP 2.0.2 Released
MultiConnect SDK 1.1.4 Release
AEP 1.4.16 Released
Registration Now Open
Conduit AEP 1.1.2 Firmware Released!
Tag Cloud
conduit
lora
mlinux
packet-forwarder
RSS
Google
Youdao
Xian Guo
Zhua Xia
My Yahoo!
newsgator
Bloglines
iNezha
