Third-Party device ABP join

Home › Forums › Conduit: mLinux Model › Third-Party device ABP join

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 26, 2017 at 1:02 am #16474
    TaeYang
    Participant

    I try this third-party device abp join.

    On device, 

    char DEVICE_EUI[]  = "0102030405060708";
char DEVICE_ADDR[] = "05060708";
char NWK_SESSION_KEY[] = "01020304050607080910111213141516";
char APP_SESSION_KEY[] = "01010101010101010101010101010101";

    On Log,

    "network" : {
      "eui" : "fb25bf0b4c6db07c",
      "key" : "37a1ec8c179b82a93f68059a1be4c4eb",
      "leasetime" : 0,
      "name" : "YOUR-NETWORK-NAME",
      "passphrase" : "YOUR-NETWORK-PASSPHRASE",
      "public" : true
   }

    And i try
    lora-query -a 00000001 A fb25bf0b4c6db07c 0102030405060708 01020304050607080910111213141516 01010101010101010101010101010101

    When i check node list(lora-query -n), adding node is done.
    But device doesn’t join the ABP.

    January 26, 2017 at 7:18 am #16477
    Jason Reiss
    Keymaster

    LoRa Network Server

    Address on each side must match.

    char DEVICE_ADDR[] = “05060708”;

    lora-query -a 05060708 A …

    January 31, 2017 at 9:42 pm #16611
    TaeYang
    Participant

    thanks for help.

    I try to modify lora config for matching each side.

    So on Log,

       "network" : {
      "eui" : "1112131415161718",
      "key" : "01010101010101010101010101010101",
      "leasetime" : 0,
      "public" : true
   },

    On device,

    char DEVICE_EUI[]  = "0102030405060708";
char DEVICE_ADDR[] = "05060708";
char NWK_SESSION_KEY[] = "01020304050607080910111213141516";
char APP_SESSION_KEY[] = "01010101010101010101010101010101";

    and i try
    lora-query -a 05060708 A 1112131415161718 0102030405060708 01020304050607080910111213141516 01010101010101010101010101010101

    but still bevice cannot join abp.

    On “http://www.multitech.net/developer/software/lora/lora-network-server/”,

    --node-add (a)    : add node 
                usage: --node-add <NODE-ADDR> [CLASS] <APP-EUI> <DEV-EUI> ([APP-KEY] | [NET-SKEY] [APP-SKEY])

    Is the eui on Log same with ‘<APP-UEI>’?
    And the key is [APP-SKEY]?

    If Adding node is correct, is there next step to communicate with end-device, not just adding node?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.