_ _ _ __ ___ | | (_)_ __ _ ___ __ | '_ ` _ \| | | | '_ \| | | \ \/ / | | | | | | |___| | | | | |_| |> < |_| |_| |_|_____|_|_| |_|\__,_/_/\_\ MultiTech Systems mLinux GNU/Linux mLinux 4.0.0 mtcdt /dev/ttyS0 Version: 4.0.1 Date: 2018-06-12T11:04:17 mtcdt login: mtadm Password: mtcdt:~$ cd /var/volatile mtcdt:/var/volatile$ ls log tmp upgrade-mts-io-2.1.0-3.12.70r20.bin mtcdt:/var/volatile$ sudo -s Password: mtcdt:/var/volatile# mlinux-firmware-upgrade upgrade-mts-io-2.1.0-3.12.70r20.bin firmware_upgrade: Checking MD5 for install.sh... -: OK firmware_upgrade: Rebooting  Broadcast message from root@mtcdt (ttyS0) (Wed Jun 20 15:33:59 2018): The system is going down for reboot NOW! INIT: Switching to runlevel: 6 mtcdt:/var/volatile# INIT: Sending processes the TERM signal Stopping ifplugd: done Stopping OpenBSD Secure Shell server: sshdstopped /usr/sbin/sshd (pid 557) . Stopping GPS (Global Positioning System) daemon gpsd monit: disabled in /etc/default Stopping bluetooth /usr/libexec/bluetooth/bluetoothd Stopping system message bus: macb f802c000.ethernet eth0: link down dbus. Stopping HOSTAP Daemon: no /usr/sbin/hostapd found; none killed Stopping ntpd: done Stopping syslogd/klogd: stopped syslogd (pid 604) stopped klogd (pid 607) done bt-pan: disabled in /etc/default No /usr/bin/python2.7 found running; none killed. Stopping Stopping lora-network-server: OK Stopping Mosquitto... Stopping crond: OK Gracefully shutting down php-fpm warning, no pid file found - php-fpm is not running ? lighttpd: disabled in /etc/default Deconfiguring network interfaces... ifdown: interface eth0 not configured done. Sending all processes the TERM signal... Sending all processes the KILL signal... Unmounting remote filesystems... Found /var/volatile/flash-upgrade/upgrade.bin Checking MD5s -: OK Starting flash upgrade from /var/volatile/flash-upgrade/upgrade.bin... install.sh starting in directory /var/volatile rootfs / rootfs rw 0 0 /dev/root / jffs2 rw,relatime 0 0 devtmpfs /dev devtmpfs rw,relatime,size=126852k,nr_inodes=31713,mode=755 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0 tmpfs /var/volatile tmpfs rw,relatime 0 0 /dev/mtdblock6 /var/config jffs2 rw,relatime 0 0 /dev/mtdblock7 /var/oem jffs2 ro,relatime 0 0 devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0 bin boot dev etc home lib media mnt opt proc run sbin sys tmp usr var www lrwxrwxrwx 1 root root 8 Jun 12 12:13 /tmp -> /var/tmp kernel-module-atmel-mci - 3.12.70-r20.1 Upgradable kernel is installed -: OK Update package list ... /usr/bin/opkg -f local.conf update Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/Packages.gz. Updated source 'mlinux-mtcdt'. /usr/bin/opkg -f local.conf install kernel-module-mts-io Upgrading kernel-module-mts-io from 2.0.4-r0.0-3.12.70r20.0 to 2.1.0-r0.0-3.12.70r20.0 on root. Installing kernel-module-mts-io (2.1.0-r0.0) on root. Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/kernel-module-mts-io_2.1.0-r0.0-3.12.70r20.0_mtcdt.ipk. Configuring kernel-module-mts-io. Configuring useradd. PATH=${PATH}:/sbin:/usr/sbin /usr/bin/opkg -f local.conf install mts-io-noarch Upgrading mts-io-noarch from 2.0.4-r0.0-3.12.70r20.0 to 2.1.0-r0.0-3.12.70r20.0 on root. Installing mts-io-noarch (2.1.0-r0.0) on root. Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/mts-io-noarch_2.1.0-r0.0-3.12.70r20.0_mtcdt.ipk. mts-io: Unloading mts-io module [INFO] mts-io:cleanup:1138: cleaning up.... [INFO] mts-io:lora_teardown:203: unloading LORA accessory card in port 1 [INFO] mts-io:mts_io_exit:1221: exiting OK mts-io: Unloading mts-io module OK update-rc.d: /etc/init.d/mts-io exists during rc.d purge (continuing) Removing any system startup links for mts-io ... /etc/rcS.d/S39mts-io update-rc.d: /etc/init.d/mts-io exists during rc.d purge (continuing) Removing any system startup links for mts-io ... Configuring mts-io-noarch. Adding system startup for /etc/init.d/mts-io. mts-io: Unloading mts-io module OK mts-io: Loading mts-io module [INFO] mts-io:mts_io_init:1046: init: v2.1.0 [INFO] mts-io:mts_id_eeprom_load:853: Pruning radio feature from mts-io [INFO] mts-io:mts_id_eeprom_load:872: Adding WiFi/BT to mts-io driver [INFO] mts-io:mts_id_eeprom_load:877: Adding GPS to mts-io driver [INFO] mts-io:mts_id_eeprom_load:889: detected board MTCDT-0.1 [INFO] mts-io:mts_id_eeprom_load:960: sizeof: 512 [INFO] mts-io:mts_id_eeprom_load:961: vendor-id: Multi-Tech Systems [INFO] mts-io:mts_id_eeprom_load:962: product-id: MTCDT-247L [INFO] mts-io:mts_id_eeprom_load:963: device-id: 12345678 [INFO] mts-io:mts_id_eeprom_load:964: hw-version: MTCDT-0.1 [INFO] mts-io:mts_id_eeprom_load:971: mac-addr: 00:08:00:10:00:00 [INFO] mts-io:mts_id_eeprom_load:973: imei: 123456789123456789 [INFO] mts-io:mts_id_eeprom_load:974: capa-gps: yes [INFO] mts-io:mts_id_eeprom_load:975: capa-din: no [INFO] mts-io:mts_id_eeprom_load:976: capa-dout: no [INFO] mts-io:mts_id_eeprom_load:977: capa-adc: no [INFO] mts-io:mts_id_eeprom_load:978: capa-wifi: yes [INFO] mts-io:mts_id_eeprom_load:979: capa-bluetooth: yes [INFO] mts-io:mts_id_eeprom_load:980: capa-lora: no [INFO] mts-io:mts_id_eeprom_load:989: mac-bluetooth: 00:00:00:00:00:00 [INFO] mts-io:mts_id_eeprom_load:998: mac-wifi: 00:00:00:00:00:00 [INFO] mts-io:mts_id_eeprom_load:1005: uuid: AAA00000000000000000000000000021 [INFO] mts-io:load_port:663: accessory card 1 vendor-id: Multi-Tech Systems [INFO] mts-io:load_port:664: accessory card 1 product-id: MTAC-LORA-H-915 [INFO] mts-io:load_port:665: accessory card 1 device-id: P87040004 [INFO] mts-io:load_port:666: accessory card 1 hw-version: MTAC-LORA-1.5 [INFO] mts-io:load_port:687: accessory card 1 eui: 00:80:00:00:00:00:00:A4 [INFO] mts-io:lora_setup:60: loading LORA accessory card in port 1 [INFO] mts-io:lora_setup:90: created link [lora] to [ap1], success:0 [INFO] mts-io:lora_setup:126: Substitute pins [INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO1 with name AP1_CDONE [INFO] mts-io:lora_setup:132: LORA H: Replace pin number 70 with number 70 [INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO2 with name AP1_CRESET [INFO] mts-io:lora_setup:132: LORA H: Replace pin number 71 with number 71 [INFO] mts-io:lora_setup:189: ap_subdirs[port_index=0] = ce97bc60 ap_subdirs[port_index=0]=bf2b921c [INFO] mts-io:load_port:622: no accessory card inserted in port 2 mts-io: Resetting system modules usb 1-2.2: USB disconnect, device number 8 usb 1-2.2: new high-speed USB device number 9 using atmel-ehci usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 usb 1-2.2: Product: Wireless USB Network Module usb 1-2.2: Manufacturer: Redpine Signals, Inc. usb 1-2.2: SerialNumber: 000000000001 usb 1-2: USB disconnect, device number 5 usb 1-2.1: USB disconnect, device number 6 usb 1-2.2: USB disconnect, device number 9 usb 1-2: new high-speed USB device number 10 using atmel-ehci usb 1-2: New USB device found, idVendor=0424, idProduct=2534 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected usb 1-2.1: new high-speed USB device number 11 using atmel-ehci usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534 usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-2.1:1.0: USB hub found hub 1-2.1:1.0: 4 ports detected usb 1-2.2: new high-speed USB device number 12 using atmel-ehci usb 1-2.2: new high-speed USB device number 13 using atmel-ehci usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 usb 1-2.2: Product: Wireless USB Network Module usb 1-2.2: Manufacturer: Redpine Signals, Inc. usb 1-2.2: SerialNumber: 000000000001 OK Rebooting... reboot: Restarting systemþRomBOOT AT91Bootstrap 3.5.3-r3 (Tue Jun 12 10:40:06 CDT 2018) NAND: ONFI flash detected NAND: Manufacturer ID: 0x2c Chip ID: 0x32 NAND: Disable On-Die ECC NAND: Initialize PMECC params, cap: 0x4, sector: 0x200 NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000 NAND: Done to load image U-Boot 2016.09.01 (Jun 12 2018 - 10:40:13 -0500) CPU: AT91SAM9G25 Crystal frequency: 12 MHz CPU clock : 400 MHz Master clock : 133.333 MHz Watchdog enabled I2C: ready DRAM: 256 MiB WARNING: Caches not enabled NAND: 256 MiB MMC: mci: 0 env_relocate_spec: crc1_ok=0 saved crc=0xffffffff calculated crc=0xf9137807 flags=255 env_relocate_spec: crc2_ok=0 saved crc=0xffffffff calculated crc=0xf9137807 flags=255 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial vendor-id: Multi-Tech Systems product-id: MTCDT-247L device-id: 12345678 hw-version: MTCDT-0.1 mac-addr: 00:08:00:10:00:00 Net: macb0 Hit any key to stop autoboot: 0 Loading from nand0, offset 0x200000 Image Name: mLinux/3.12.70/mtcdt Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3095397 Bytes = 3 MiB Load Address: 20008000 Entry Point: 20008000 ## Booting kernel from Legacy Image at 22000000 ... Image Name: mLinux/3.12.70/mtcdt Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3095397 Bytes = 3 MiB Load Address: 20008000 Entry Point: 20008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 3.12.70 (jenkins@frylock) (gcc version 6.2.0 (GCC) ) #1 PREEMPT Tue Jun 12 10:38:30 CDT 2018 Machine: Atmel AT91SAM (Device Tree), model: Multi-Tech Systems MTCDT AT91: Detected soc type: at91sam9x5 AT91: Detected soc subtype: at91sam9g25 AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000 Kernel command line: mem=256M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc0579324 (5573 kB) .init : 0xc057a000 - 0xc05a4f84 ( 172 kB) .data : 0xc05a6000 - 0xc05d1720 ( 174 kB) .bss : 0xc05d172c - 0xc05f1d3c ( 130 kB) Preemptible hierarchical RCU implementation. NR_IRQS:16 nr_irqs:16 16 sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms Calibrating delay loop... 199.06 BogoMIPS (lpj=995328) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Initializing cgroup subsys blkio CPU: Testing write buffer coherency: ok Setting up static identity map for 0xc0420670 - 0xc04206c8 devtmpfs: initialized pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations AT91: Power Management (with slow clock mode) AT91: Starting after software reset gpio-at91 fffff400.gpio: at address fefff400 gpio-at91 fffff600.gpio: at address fefff600 gpio-at91 fffff800.gpio: at address fefff800 gpio-at91 fffffa00.gpio: at address fefffa00 pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver bio: create slab at 0 at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c-gpio i2c.3: using pins 30 (SDA) and 31 (SCL) i2c-gpio i2c.4: using pins 64 (SDA) and 65 (SCL) Switched to clocksource tcb_clksrc NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. ROMFS MTD (C) 2007 Red Hat, Inc. msgmni has been set to 495 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered (default) io scheduler deadline registered io scheduler cfq registered fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL console [ttyS0] enabled f8040000.serial: ttyS1 at MMIO 0xf8040000 (irq = 26, base_baud = 8333333) is a ATMEL_SERIAL brd: module loaded loop: module loaded at24_get_setup: found a match for eeprom at 56 at24 0-0056: 512 byte 24c04 EEPROM, writable, 16 bytes/write sam9x5: read 512 bytes from id eeprom at24_get_setup: found a match for eeprom at 50 at24 1-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write sam9x5: read 512 bytes from ap1 eeprom at24_get_setup: found a match for eeprom at 52 at24 1-0052: 512 byte 24c04 EEPROM, writable, 16 bytes/write sam9x5: ap2 eeprom read failed: -110 atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers. ONFI param page 0 valid ONFI flash detected NAND device: Manufacturer ID: 0x2c, Chip ID: 0xaa (Micron MT29F2G08ABBEAHC), 256MiB, page size: 2048, OOB size: 64 atmel_nand 40000000.nand: ONFI params, minimum required ECC: 4 bits in 512 bytes atmel_nand 40000000.nand: Initialize PMECC params, cap: 4, sector: 512 Scanning device for bad blocks 9 ofpart partitions found on MTD device atmel_nand Creating 9 MTD partitions on "atmel_nand": 0x000000000000-0x000010000000 : "NANDFlash" 0x000000000000-0x000000040000 : "at91bootstrap" 0x000000040000-0x0000000c0000 : "u-Boot" 0x0000000c0000-0x000000160000 : "u-Boot Config" 0x000000160000-0x000000200000 : "u-Boot Redundant Config" 0x000000200000-0x000000800000 : "uImage" 0x000000800000-0x000001000000 : "Config" 0x000001000000-0x000001800000 : "OEM Config" 0x000001800000-0x000010000000 : "Rootfs" tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky libphy: MACB_mii_bus: probed macb f802c000.ethernet eth0: Cadence MACB at 0xf802c000 irq 23 (00:08:00:10:00:00) macb f802c000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=f802c000.etherne:00, irq=-1) PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-atmel: EHCI Atmel driver atmel-ehci 700000.ehci: EHCI Host Controller atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1 atmel-ehci 700000.ehci: irq 31, io mem 0x00700000 atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.12.70 ehci_hcd usb usb1: SerialNumber: 700000.ehci hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver at91_ohci 600000.ohci: AT91 OHCI at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2 at91_ohci 600000.ohci: irq 31, io mem 0x00600000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: AT91 OHCI usb usb2: Manufacturer: Linux 3.12.70 ohci_hcd usb usb2: SerialNumber: at91 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected rtc (null): invalid alarm value: 1900-1-1 0:0:0 at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0 at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver. i2c /dev entries driver at91sam9_wdt: enabled (heartbeat=15 sec, nowayout=0) Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3964 buckets, 15856 max) xt_time: kernel timezone is -0000 ipip: IPv4 over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_gre: GRE over IPv4 tunneling driver IPv4 over IPSec tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 mip6: Mobile IPv6 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 l2tp_core: L2TP core driver, V2.0 Key type dns_resolver registered at91_rtc fffffeb0.rtc: setting system clock to 2018-06-20 20:34:34 UTC (1529526874) usb 2-3: new full-speed USB device number 2 using at91_ohci usb 2-3: New USB device found, idVendor=04e2, idProduct=1414 usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. VFS: Mounted root (jffs2 filesystem) readonly on device 31:8. devtmpfs: mounted Freeing unused kernel memory: 168K (c057a000 - c05a4000) INIT: version 2.88 booting jffs2: notice: (76) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. jffs2: notice: (76) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. Starting udev udevd[86]: starting version 3.2 udevd[87]: starting eudev-3.2 atmel_spi f0000000.spi: version: 0x212 atmel_spi f0000000.spi: Using dma0chan1 (tx) and dma0chan2 (rx) for DMA transfers atmel_spi f0000000.spi: Atmel SPI Controller at 0xf0000000 (irq 28) atmel_spi f0000000.spi: master is unqueued, this is deprecated usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters vizzini 2-3:1.0: This device cannot do calls on its own. It is not a modem. vizzini 2-3:1.0: ttyXRUSB0: XR21v14x usb uart device vizzini 2-3:1.2: This device cannot do calls on its own. It is not a modem. vizzini 2-3:1.2: ttyXRUSB1: XR21v14x usb uart device vizzini 2-3:1.4: This device cannot do calls on its own. It is not a modem. vizzini 2-3:1.4: ttyXRUSB2: XR21v14x usb uart device vizzini 2-3:1.6: This device cannot do calls on its own. It is not a modem. vizzini 2-3:1.6: ttyXRUSB3: XR21v14x usb uart device usbcore: registered new interface driver vizzini vizzini: Exar USB UART Driver for XR21V141x atmel_spi f0004000.spi: version: 0x212 atmel_spi f0004000.spi: Using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers atmel_spi f0004000.spi: Atmel SPI Controller at 0xf0004000 (irq 29) atmel_spi f0004000.spi: master is unqueued, this is deprecated tmp102 0-0048: initialized pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti pps pps0: new PPS source pps.7.-1 pps pps0: Registered IRQ 32 as PPS source atmel_usba_udc 500000.gadget: MMIO registers at 0xf803c000 mapped at d0b5e000 atmel_usba_udc 500000.gadget: FIFO at 0x00500000 mapped at e1100000 atmel_mci f0008000.mmc: version: 0x504 atmel_mci f0008000.mmc: using dma0chan3 for DMA transfers atmel_mci f0008000.mmc: Atmel MCI controller at 0xf0008000 irq 22, 1 slots /var/config already mounted /var/oem already mounted directory bluetooth operations directory dnsmasq.d operations directory modprobe.d operations mts-io: Loading mts-io module [INFO] mts-io:mts_io_init:1046: init: v2.1.0 [INFO] mts-io:mts_id_eeprom_load:853: Pruning radio feature from mts-io [INFO] mts-io:mts_id_eeprom_load:872: Adding WiFi/BT to mts-io driver [INFO] mts-io:mts_id_eeprom_load:877: Adding GPS to mts-io driver [INFO] mts-io:mts_id_eeprom_load:889: detected board MTCDT-0.1 [INFO] mts-io:mts_id_eeprom_load:960: sizeof: 512 [INFO] mts-io:mts_id_eeprom_load:961: vendor-id: Multi-Tech Systems [INFO] mts-io:mts_id_eeprom_load:962: product-id: MTCDT-247L [INFO] mts-io:mts_id_eeprom_load:963: device-id: 12345678 [INFO] mts-io:mts_id_eeprom_load:964: hw-version: MTCDT-0.1 [INFO] mts-io:mts_id_eeprom_load:971: mac-addr: 00:08:00:10:00:00 [INFO] mts-io:mts_id_eeprom_load:973: imei: 123456789123456789 [INFO] mts-io:mts_id_eeprom_load:974: capa-gps: yes [INFO] mts-io:mts_id_eeprom_load:975: capa-din: no [INFO] mts-io:mts_id_eeprom_load:976: capa-dout: no [INFO] mts-io:mts_id_eeprom_load:977: capa-adc: no [INFO] mts-io:mts_id_eeprom_load:978: capa-wifi: yes [INFO] mts-io:mts_id_eeprom_load:979: capa-bluetooth: yes [INFO] mts-io:mts_id_eeprom_load:980: capa-lora: no [INFO] mts-io:mts_id_eeprom_load:989: mac-bluetooth: 00:00:00:00:00:00 [INFO] mts-io:mts_id_eeprom_load:998: mac-wifi: 00:00:00:00:00:00 [INFO] mts-io:mts_id_eeprom_load:1005: uuid: AAA00000000000000000000000000021 [INFO] mts-io:load_port:663: accessory card 1 vendor-id: Multi-Tech Systems [INFO] mts-io:load_port:664: accessory card 1 product-id: MTAC-LORA-H-915 [INFO] mts-io:load_port:665: accessory card 1 device-id: P87040004 [INFO] mts-io:load_port:666: accessory card 1 hw-version: MTAC-LORA-1.5 [INFO] mts-io:load_port:687: accessory card 1 eui: 00:80:00:00:00:00:00:A4 [INFO] mts-io:lora_setup:60: loading LORA accessory card in port 1 [INFO] mts-io:lora_setup:90: created link [lora] to [ap1], success:0 [INFO] mts-io:lora_setup:126: Substitute pins [INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO1 with name AP1_CDONE [INFO] mts-io:lora_setup:132: LORA H: Replace pin number 70 with number 70 [INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO2 with name AP1_CRESET [INFO] mts-io:lora_setup:132: LORA H: Replace pin number 71 with number 71 [INFO] mts-io:lora_setup:189: ap_subdirs[port_index=0] = cf0ccca0 ap_subdirs[port_index=0]=bf0d521c [INFO] mts-io:load_port:622: no accessory card inserted in port 2 mts-io: Resetting system modules usb 1-2: new high-speed USB device number 2 using atmel-ehci usb 1-2: New USB device found, idVendor=0424, idProduct=2534 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected usb 1-2.1: new high-speed USB device number 3 using atmel-ehci usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534 usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-2.1:1.0: USB hub found hub 1-2.1:1.0: 4 ports detected usb 1-2.2: new high-speed USB device number 4 using atmel-ehci usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 usb 1-2.2: Product: Wireless USB Network Module usb 1-2.2: Manufacturer: Redpine Signals, Inc. usb 1-2.2: SerialNumber: 000000000001 usb 1-2: USB disconnect, device number 2 usb 1-2.1: USB disconnect, device number 3 usb 1-2.2: USB disconnect, device number 4 usb 1-2: new high-speed USB device number 5 using atmel-ehci usb 1-2: New USB device found, idVendor=0424, idProduct=2534 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected usb 1-2.1: new high-speed USB device number 6 using atmel-ehci usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534 usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-2.1:1.0: USB hub found hub 1-2.1:1.0: 4 ports detected usb 1-2.2: new high-speed USB device number 7 using atmel-ehci usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 usb 1-2.2: Product: Wireless USB Network Module usb 1-2.2: Manufacturer: Redpine Signals, Inc. usb 1-2.2: SerialNumber: 000000000001 OK [INFO] ../../git/src/eeprom_main.c:main:580: loaded id eeprom from /sys/bus/i2c/devices/i2c-0/0-0056/eeprom successfully [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:291: sizeof: 512 [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:292: vendor-id: Multi-Tech Systems [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:293: product-id: MTCDT-247L [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:294: device-id: 12345678 [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:295: hw-version: MTCDT-0.1 [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:302: mac-addr: 00:08:00:10:00:00 [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:303: imei: 123456789123456789 [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:304: capa-gps: yes [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:305: capa-din: no [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:306: capa-dout: no [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:307: capa-adc: no [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:308: capa-wifi: yes [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:309: capa-bluetooth: yes [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:310: capa-lora: no [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:318: mac-bluetooth: 00:00:00:00:00:00 [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:325: mac-wifi: 00:00:00:00:00:00 [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:331: uuid: AAA00000000000000000000000000021 [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:341: lora-eui: "00:00:00:00:00:00:00:00" [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:343: lora-product-id: [INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:344: lora-hw-version: Reading accessory cards data Adding accessory cards data rs9113: Loading rs9113 modules with COEX=6 and Country=0 usb 1-2.2: USB disconnect, device number 7 cfg80211: Calling CRDA to update world regulatory domain usb 1-2.2: new high-speed USB device number 8 using atmel-ehci usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 usb 1-2.2: Product: Wireless USB Network Module usb 1-2.2: Manufacturer: Redpine Signals, Inc. usb 1-2.2: SerialNumber: 000000000001 Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized onebox_wlan_nongpl: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint usbcore: registered new interface driver Onebox-USB WLAN protocol selected BT protocol selected Driver initialization is done OK INIT: Entering runlevel: 5 Configuring network interfaces... IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready done. Starting system message bus: dbus. Starting ifplugd: Starting /usr/sbin/ifplugd... done macb f802c000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Starting OpenBSD Secure Shell server: sshd done. Starting bluetooth Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized bluetoothd Would start /usr/sbin/ntpd -u ntp:ntp -p /var/run/ntp.pid -g -c /etc/ntp.conf , and add -20 to the priority. gpsd_ubx_settime: GPS does not have a fix yet. Try again later. Starting syslogd/klogd: done bt-pan: disabled in /etc/default Starting rfcomm /usr/sbin/start-stop-daemon -S -p /run/rfcomm.pid -x /usr/bin/python2.7 -b -- /usr/libexec/bluetooth/rfcomm --login