ppp

Description: PPP settings : OBJECT

Element Type Description
authentication OBJECT Specifies the PPP authentication settings
   password STRING Specifies the password of the PPP account
   type STRING Specifies the type of authentication to use when connecting to PPP: PAP, CHAP or PAP-CHAP (default:’PAP-CHAP’)
   username STRING Specifies the username of PPP account
connectTimeout UINT Specifies the amount of time in seconds to wait for a connection while in receive mode (default:90)
dialOnDemand BOOL Enables or disables dial on demand : (default:false)
diversity BOOL Enables or disables antenna diversity : (default:true)
enabled BOOL Enables or disables PPP connection : (default:false)
idleTimeout UINT Specifies the amount of time in seconds before a connection is considered idle and is disconnected (default:180)
keepAlive OBJECT Specifies the PPP keep alive settings
   dataRecv OBJECT Keeps the PPP connection alive as long as data is being received
      enabled BOOL Enables or disables the data receive monitor (default:false)
      window UINT Specifies the size of the connection window in minutes (default:0)
   enabled OBJECT Enables or disables the keep alive feature
   hostname STRING Specifies the name of a host that can accept a PPP connection
   icmpCount UINT Specifies the number of pings to send (default:4)
   pingInterval UINT Specifies the interval to send pings, in seconds (default:60)
   tcpPort UINT Specifies the connection port on a host (default:0)
   type STRING Specifies the method used for keep alive, ICMP or TCP (default:ICMP)
maxRetries UINT Specifies the maximum acceptable number of retries before failure (default:0)
modem OBJECT Specifies the modem settings
   apnString STRING Specifies the APN connection string designated by the service provider
   baudRate UINT Specifies the baud rate of the modem (default:115200)
   contextId UINT Specifies context definition id used with AT+CGDCONT
   commands ARRAY Contains a list of AT commands to send to the modem after a successfully connection
   connectString STRING Specifies the string to send to the modem after successful connection (default:’CONNECT’)
   dialNumber STRING Specifies the number the modem should dial for connection (default:’*99***1#’)
   dialPrefix STRING Specifies the prefix to add to the number being dialed (default:’ATDT’)
   initStrings ARRAY Contains a list of init strings to send to the modem (default:['AT+CSQ'])
   simPin STRING Specifies the PIN used to unlock the SIM
nat BOOL Enables or disables the NAT feature (default:true)
powerOnInitString STRING Specifies the string to send to the radio on boot up
wakeUpOnCall OBJECT Determines the wake-up behavior of radio when a call comes in
   ackString STRING Specifies the string used to acknowledge the receipt of an SMS to the delivering SMSC
   callerIds OBJECT Contains a list of valid caller IDs for wake-up
      action STRING Specifies the action to perform on wake-up
      text STRING Specifies the text of a wake-up SMS message or caller-ID value
      type STRING Specifies the type of call, CALLER or SMS
   delay UINT Specifies the amount of time to wait after call before reconnecting in seconds (default:10)
   enabled BOOL Enables or disables the wake-up on call feature (default:false)
   fromLan BOOL Enables or disables wake-up on LAN activity (default:false)
   initStrings ARRAY Contains a list of cellular radio AT init strings
   onCallerId BOOL Enables or disables wake-up on caller ID (default:false)
   onRing BOOL Enables or disables wake-up on ring (default:false)
   onSms BOOL Enables or disables wake-up on SMS (default:false)