Bluetooth Low Energy – AEP

Bluetooth Low Energy allows you to search and/or scan for BLE devices.  You can connect with selected BLE device to obtain the list of UUIDs for services and characteristics that are supported on the device.

A python library called gattlib is integrated into the device and can be used for scans, reads, writes, and handling notifications.

You must develop a custom application to read and accept the data from a BLE device. Please refer to the example on the BLE for mLinux page as well as the  Creating a Custom Application page.

NOTE: If you already enabled both Bluetooth Classic and Bluetooth Low Energy (BLE), you cannot enable Wi-Fi as WAN.

  1. Go to Wireless > Bluetooth Low Energy > Settings, check the Enabled box.
  2. Under Power Mode, select from the drop-down including Custom, High, Medium or Low.
  3. Click Submit.
  4. Under the Available Device Servers, the detected BLE devices appear.
  5. To choose a device from the Available Device Servers, click on the name of your desired device.
  6. If you do not see your desired device, click Add Device. Enter the Name and MAC Address of your BLE device.
  7. Click Finish. Your device appears under Saved Devices.
  8. Click Save and Restart to save your changes.