Restoring User Defined Settings to the Device

You need:

  • A pin, paperclip, or similar thin object that can fit into the reset hole

 

To restore user defined settings for an AEP device:

  1. Locate the hole in the panel labeled RESET. The reset button is recessed into the housing.
  2. Use the pin to press in the button for between 3 to 29 seconds, then release the reset button.
    • If you do not press in the button long enough, the device will reset, but the user defined settings will not be restored.
    • If you hold it too long (30 seconds or longer), factory default settings will be restored. Conduit_Reset_Button

The RESET button is in the same location all Conduit models.