Back Panel Connectors

Label Description
CELL, AUX Cellular antenna inputs.

  • H5: CELL – Primary. AUX – Diversity.
  • LTE: CELL and AUX. (Requires two antennas but Diversity is optional).
WIFI Wi-Fi/Bluetooth antenna input.
GPS GNSS antenna input (w/ 3VDC active antenna support).
AP1, AP2 Slots for MultiTech accessory cards. You can install an accessory card in either slot. Both slots can be occupied at one time.
USB DEVICE User-defined, high-speed 480 Mbps, standard USB 2.0 Micro B connector. By default, this port is a serial port terminal interface, but you can program it to act as another device such as a mass storage device or an Ethernet port.
E-NET RJ-45 receptacle for standard Ethernet 10/100 Base-T.

Ethernet LEDs (located at the bottom of the connector): Orange LED indicates activity/link. Blinks when there is transmit and receive on the Ethernet link. It shows a steady light when there is a valid Ethernet connection. Green LED indicates link speed. Lit when Ethernet is linked at 100 Mbps. If not lit, Ethernet is linked at 10 Mbps.

Caution: Ethernet ports and command ports are not designed to be connected to a public telecommunication network or used outside the building or campus.
USB HOST High-speed, standard USB 2.0 Type A connector. 500mA maximum current draw. You can plug into the Host port a device such as a flash drive, camera, or printer if the Linux kernel has the appropriate driver.

9-32 Vdc power receptacle for provided power cord.