xdot rx2 datarate

Home › Forums › mDot/xDot › xdot rx2 datarate

Tagged: 

Viewing 1 post (of 1 total)
  • Author
    Posts
  • March 22, 2019 at 7:26 am #27493
    alejandro ballesta
    Participant

    Hi team,

    how can I check the RX2 datarate currently configured in the xdot?
    I am debugging communication with Actility and need to check if the xdot is correctly changing the RX2 datarate as requested by actility. I also check the MAC reply in the uplink msg and the xdot is ACKing the rx2 datarate but, as soon as the gateway changes, no more data is received in rx2.

    I enabled LOG 6 but not sure which message includes the data. Can you point where to look at?

    Thanks!

    —————————–
    [DEBUG] Send with tx timeout 40000
    [INFO] Preparing frame
    [TRACE] NA: 00112233
    [TRACE] NSK: 00112233001122330011223300112233
    [TRACE] DSK: 33221100332211003322110033221100
    [TRACE] Adding MIC to frame
    [TRACE] Sending 15 bytes
    [TRACE] Number of available channels: 3
    [DEBUG] Using channel 2 : 868500000
    [INFO] Configure radio for TX
    [DEBUG] Session pwr: 4 ant: 3 max: 14
    [DEBUG] Radio Power index: 0 output: 3 total: 6
    [DEBUG] TX PWR: 0 DR: 4 SF: 8 BW: 0 CR: 1 PL: 8 CRC: 1 IQ: 0
    [INFO] Configure radio for TX
    [DEBUG] Session pwr: 4 ant: 3 max: 14
    [DEBUG] Radio Power index: 0 output: 3 total: 6
    [DEBUG] TX PWR: 0 DR: 4 SF: 8 BW: 0 CR: 1 PL: 8 CRC: 1 IQ: 0
    [DEBUG] update TOE: freq: 868500000 i:1 toa: 92 DC:100
    [DEBUG] mDotEvent – TxStart
    [DEBUG] mDotEvent – TxDone
    [TRACE] Event: OK
    [TRACE] Flags Tx: 1 Rx: 0 RxData: 0 RxSlot: 0 LinkCheck: 0 JoinAccept: 0
    [TRACE] Info: Status: 0 ACK: 0 Retries: 0 TxDR: 0 RxPort: 0 RxSize: 0 RSSI: 0 SNR: 0 Energy: 0 Margin: 0 Gateways: 0
    [DEBUG] RadioEvent – TxDone
    [INFO] Rx Window 1
    [DEBUG] mDotEvent – RxTimeout on Slot 1
    [TRACE] Event: RX_TIMEOUT
    [TRACE] Flags Tx: 0 Rx: 0 RxData: 0 RxSlot: 1 LinkCheck: 0 JoinAccept: 0
    [TRACE] Info: Status: 3 ACK: 0 Retries: 0 TxDR: 0 RxPort: 0 RxSize: 0 RSSI: 0 SNR: 0 Energy: 0 Margin: 0 Gateways: 0
    [INFO] Rx Window 2
    [DEBUG] mDotEvent – RxTimeout on Slot 2
    [TRACE] Event: RX_TIMEOUT
    [TRACE] Flags Tx: 0 Rx: 0 RxData: 0 RxSlot: 2 LinkCheck: 0 JoinAccept: 0
    [TRACE] Info: Status: 3 ACK: 0 Retries: 0 TxDR: 0 RxPort: 0 RxSize: 0 RSSI: 0 SNR: 0 Energy: 0 Margin: 0 Gateways: 0
    [ERROR] No packet received
    ———————————————-

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.