xDot "Failed to join network" on TTN with EU868
- This topic has 0 replies, 1 voice, and was last updated 5 years, 5 months ago by sven@rysta.io.
-
AuthorPosts
-
November 2, 2018 at 5:48 pm #26704sven@rysta.ioParticipant
I have problems to get myxDot connected to TheThingsNetwork (TTN).
I have a TTN Gateway in direct line of sight and tried with the binary firmware releases 3.1, 3.0, 2.0.16 and even self-compiled mbed-os OTA example. In all setups, the xDot cannot join the network and I don’t see any logs in the TTN console hinting to a successful radio connection.I’m using a MTXDOT-EU1-A00 Demoboard and I’m located in Europe/Germany.
Manufacturing date was: 02/2018Here is the Output of At&V
Device ID: 00:80:00:00:04:00:xx:xx Default Frequency Band: US915 Current Frequency Band: EU868 Frequency Sub Band: 0 Public Network: on Start Up Mode: COMMAND Network Address: 00000000 Network ID: 70:b3:d5:7e:d0:xx:xx:xx Network ID Passphrase: Network Key: b2.65.26.0e.62.5e.84.8c.9a.fd.ee.95.99.xx.xx.xx Network Key Passphrase: Network Session Key: 00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00 Data Session Key: 00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00 Network Join Mode: OTA Network Join Retries: 2 Preserve Session: off Join Byte Order: LSB Join Delay: 5 Join Rx1 DR Offset: 0 Join Rx2 Datarate: DR8 - FSK Join Rx2 Frequency: 923300000 App Port: 1 Listen Before Talk: off Link Check Threshold: off Link Check Count: off Error Correction: 1 bytes ACK Retries: off Packet Repeat: 1 Encryption: on CRC: on Adaptive Data Rate: off Command Echo: on Verbose Response: off Tx Frequency: 0 Tx Data Rate: DR0 - SF12BW125 Min/Max Tx Data Rate: Min: DR0 - SF12BW125 Max: DR7 - FSK Tx Power: 20 Min/Max Tx Power: Min: 0 Max: 27 Tx Antenna Gain: 3 Tx Wait: on Tx Inverted Signal: off Rx Delay: 1 s Rx Inverted Signal: on Rx Output Style: HEXADECIMAL Debug Baud Rate: 115200 Serial Baud Rate: 115200 Serial Flow Control: off Serial Clear On Error: on Wake Mode: INTERVAL Wake Interval: 10 s Wake Delay: 100 ms Wake Timeout: 20 ms Wake Pin: WAKE Log Level: 6
And here the debug output on AT+JOIN
[TRACE] Initiating join... [TRACE] Join Network - OTA [INFO] Send join request RxDelay: 0 Rx1Offset: 0 Rx2Freq: 923300000 Rx2Dr: 8 [TRACE] DevEUI: 0080000004005xxx [TRACE] AppEUI: 70b3d57ed0013xxx [TRACE] AppKey: b265260e625e848c9afdee959970xxxxx [INFO] Configure radio for TX [DEBUG] Session pwr: 20 ant: 3 max: 14 [DEBUG] Radio Power index: 10 output: 11 total: 14 [DEBUG] TX PWR: 10 DR: 0 SF: 12 BW: 0 CR: 1 PL: 8 CRC: 1 IQ: 0 [INFO] Configure radio for TX [DEBUG] Session pwr: 20 ant: 3 max: 14 [DEBUG] Radio Power index: 10 output: 11 total: 14 [DEBUG] TX PWR: 10 DR: 0 SF: 12 BW: 0 CR: 1 PL: 8 CRC: 1 IQ: 0 [TRACE] Sending 23 bytes [TRACE] Number of available channels: 3 [DEBUG] Using channel 0 : 868100000 [INFO] Configure radio for TX [DEBUG] Session pwr: 20 ant: 3 max: 14 [DEBUG] Radio Power index: 10 output: 11 total: 14 [DEBUG] TX PWR: 10 DR: 0 SF: 12 BW: 0 CR: 1 PL: 8 CRC: 1 IQ: 0 [INFO] Configure radio for TX [DEBUG] Session pwr: 20 ant: 3 max: 14 [DEBUG] Radio Power index: 10 output: 11 total: 14 [DEBUG] TX PWR: 10 DR: 0 SF: 12 BW: 0 CR: 1 PL: 8 CRC: 1 IQ: 0 [DEBUG] update TOE: freq: 868100000 i:1 toa: 1482 DC:100 [DEBUG] mDotEvent - TxDone [TRACE] Event: OK [TRACE] Flags Tx: 1 Rx: 0 RxData: 0 RxSlot: 0 LinkCheck: 0 JoinAccept: 0 [TRACE] Info: Status: 0 ACK: 0 Retries: 0 TxDR: 0 RxPort: 0 RxSize: 0 RSSI: 0 SNR: 0 Energy: 0 Margin: 0 Gateways: 0 [DEBUG] RadioEvent - TxDone [TRACE] RX1 on freq: 868100000 [TRACE] RX DR: 0 SF: 12 BW: 0 CR: 1 PL: 8 STO: 8 CRC: 0 IQ: 1 [TRACE] Stats: Up: 1 Down: 0 DupTx: 0 CRC Errors: 0 [INFO] Rx Window 1 [TRACE] Event: RX_TIMEOUT [TRACE] Flags Tx: 0 Rx: 0 RxData: 0 RxSlot: 1 LinkCheck: 0 JoinAccept: 0 [TRACE] Info: Status: 3 ACK: 0 Retries: 0 TxDR: 0 RxPort: 0 RxSize: 0 RSSI: 0 SNR: 0 Energy: 0 Margin: 0 Gateways: 0 [TRACE] RX2 on freq: 923300000 [TRACE] RX DR: 9 SF: 14 BW: 50 CR: 0 PL: 10 STO: 12 CRC: 0 IQ: 1 [TRACE] Stats: Up: 1 Down: 0 DupTx: 0 CRC Errors: 0 [INFO] Rx Window 2 [TRACE] Event: RX_TIMEOUT [TRACE] Flags Tx: 0 Rx: 0 RxData: 0 RxSlot: 2 LinkCheck: 0 JoinAccept: 0 [TRACE] Info: Status: 3 ACK: 0 Retries: 0 TxDR: 0 RxPort: 0 RxSize: 0 RSSI: 0 SNR: 0 Energy: 0 Margin: 0 Gateways: 0 [ERROR] Failed to join network
I tried for hours getting the device connected to a gateway – I tried a different location (again with a gateway close by) and still no success. I cannot make fully sense of the debug output – but as far as I understand there is no gateway in reach. (Im living in Berlin and there are at least 3-4 TTN routers in reach).
Is my xDot broken??
- This topic was modified 5 years, 5 months ago by sven@rysta.io.
- This topic was modified 5 years, 5 months ago by sven@rysta.io.
- This topic was modified 5 years, 5 months ago by sven@rysta.io.
-
AuthorPosts
- You must be logged in to reply to this topic.