Unable to Perform Factory Reset

Home › Forums › Conduit: mLinux Model › Unable to Perform Factory Reset

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 17, 2020 at 11:59 am #30442
    Rick St John
    Participant

    Hello,

    I have a mLinux conduit (DOM 2015.06.19) running mLinux 5.1.8. I’m unable to perform a hard factory reset via the front reset button. I have held the button for 30 seconds, 60 seconds, 120 seconds; each time the conduit starts back up and asks for the password we originally assigned. Also, it still has our custom firmware on the unit after reset. I am firmly holding the button, and getting feedback from the front lights as well as TeraTerm that the unit is rebooting. Any help is appreciated. Thanks.

    March 19, 2020 at 5:36 pm #30466
    Rick St John
    Participant

    I ended downgrading the conduit to 3.3.7 then upgrading it back to mLinux 5.1.8. That fixed the problem of clearing out our custom firmware. No further info required.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.