Supported EU868 frequencies by MTCAP-868-001L

Home › Forums › General › Supported EU868 frequencies by MTCAP-868-001L

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 1, 2018 at 9:34 am #22722
    Antonio Di Bacco
    Participant

    I know that frequency plan for EU868 is like this:
    Uplink:

    1-> 868.1 – SF7BW125 to SF12BW125
    2-> 868.3 – SF7BW125 to SF12BW125 and SF7BW250
    3-> 868.5 – SF7BW125 to SF12BW125
    4-> 867.1 – SF7BW125 to SF12BW125
    5-> 867.3 – SF7BW125 to SF12BW125
    6-> 867.5 – SF7BW125 to SF12BW125
    7-> 867.7 – SF7BW125 to SF12BW125
    8-> 867.9 – SF7BW125 to SF12BW125
    9-> 868.8 – FSK

    Downlink:
    869.525 – SF9BW125 (RX2 downlink only)

    I suppose that MTCAP-868-001L support the above channels, but I also see that a parameter lora[“frequencyEU”] can be configured with these values:

    default: 869500000
    range: [863500000 – 867500000] and [869100000 – 869500000]

    I don’t understand the meaning of this parameter. Anyone can help?

    Regards,
    Antonio.

    March 1, 2018 at 10:46 am #22723
    Jason Reiss
    Keymaster

    Five additional channels can be configured.

    For 863.5-867.5 they will be centered around the configured frequency.

    4-> 867.1 – SF7BW125 to SF12BW125
    5-> 867.3 – SF7BW125 to SF12BW125
    6-> 867.5 – SF7BW125 to SF12BW125
    7-> 867.7 – SF7BW125 to SF12BW125
    8-> 867.9 – SF7BW125 to SF12BW125

    For 869.1-869.5 there are only four channels available due to alarm bands.
    The radio frequency will set to 869.4 and channel as follows.

    869.4 => Channels 868.8, 869.0, 869.525, 869.8

    Functionality depends on installed version.
    See 1.0.35 in change log for last change to the behavior detailed above.
    http://www.multitech.net/developer/software/mlinux/lora-network-server-changelog/

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.