Tagged: Mdot problem
Antonio Fernandez.
Antonio FernandezHello
this is my first post.
the problem is:
I upgrade the firmware of the mdot.
the version is:
https://www.multitech.com/models/94557131LF
I used the official manual: http://www.multitech.net/developer/software/dot-box-and-evb-software/update-firmware-using-binary-file/
when I finished the upgrade and the device does not work, the screen is shut down and green led stays active.
could you help me to resolve this issue?
Thanks in advance.
Leon LindenfelserHi Antonio,
Was it working before you programmed it?
What firmware did you flash it with? Did you flash firmware from the ftp site?
https://webfiles.multitech.com/wireless/mtdot/dot-v3.0.0/
What do you mean the screen is shut down? With the factory AT command firmware you communicate through the serial interface.
Which developer card are you using?
Kind regards,
Leon
Leon LindenfelserHi Antonio,
Do you have the dotbox… https://www.multitech.com/models/99999211LF? If you have the dotbox, look for the heading MTDOT-BOX/EVB at http://www.multitech.net/developer/downloads/ and download the 2.1.2 version of code.
Kind regards,
Leon
Antonio FernandezHello Leon Lindenfelser:
thank you very much, the device works.
the mistake was the version of the device(MTDOT-BOX/EVB).
your suggestion was what I was looking for.
kind regards.
Antonio