opkg update returned 4
- This topic has 7 replies, 2 voices, and was last updated 4 years, 5 months ago by
.
Viewing 8 posts - 1 through 8 (of 8 total)
Viewing 8 posts - 1 through 8 (of 8 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: AEP Model › opkg update returned 4
Tagged: opkg update returned 4
Justine.
JustineHi,
I’m having troubles with the gateway to update the packages. I’m getting this :
admin@mtcdt:~# opkg update
Downloading http://multitech.net/mlinux/feeds/3.3.22/all/Packages.gz.
Downloading http://multitech.net/mlinux/feeds/3.3.22/arm926ejste/Packages.gz.
Downloading http://multitech.net/mlinux/feeds/3.3.22/mtcdt/Packages.gz.
Collected errors:
* opkg_download: Failed to download http://multitech.net/mlinux/feeds/3.3.22/all/Packages.gz, wget returned 4.
* opkg_download: Failed to download http://multitech.net/mlinux/feeds/3.3.22/arm926ejste/Packages.gz, wget returned 4.
* opkg_download: Failed to download http://multitech.net/mlinux/feeds/3.3.22/mtcdt/Packages.gz, wget returned 4.
I have found that this means there is a network failure, but I think that my network is functionning :
admin@mtcdt:~# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=49 time=133 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=49 time=64.5 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=49 time=70.8 ms
^C
— 8.8.8.8 ping statistics —
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 64.551/89.588/133.381/31.073 ms
Could someone help me with this issue ?
Thanks
Justine
Jason ReissTry to see if the DNS is being resolved?
The links look to be working.
# nslookup multitech.net
JustineAh no, it can’t be resolved :
admin@mtcdt:~# nslookup multitech.net
Server: 127.0.0.1
Address 1: 127.0.0.1 localhost
nslookup: can’t resolve ‘multitech.net’
Do you know what I should change ?
Thank you
Jason ReissWhat packages are you looking to update?
On AEP normally an update image is applied.
They are available here.
http://www.multitech.net/developer/downloads/
JustineHi,
I’m trying to follow this : https://github.com/trong63/python_mqtt_sample
I would like to easily display the MQTT data from the broker with a client, if I’m right.
Could you tell me how to know the MTCDT version I should download ?
Thank you
JustineI managed to update the firmware on the gateway. I used the 1.6.4 version.
Thank you
Jason ReissThe python mqtt packet should be in v1.6.4 and greater.
admin@mtcdt:~$ opkg list | grep mqtt
python-paho-mqtt – 1.1-r0.0
JustineYes, thank you, it worked 🙂