Launch Node red App

[Perico]

Hello,
I’m following this page:http://www.multitech.net/developer/software/lora/conduit-aep-lora-communication/ to configure my node-red but I’m not able to open node red.
Somebody knows the reason? My gateway runs as a network server, can affect it?

Thanks, Perico.

• This topic was modified 3 years, 9 months ago by Perico.

[Steve Kovarik]

Hi Perico

Node-Red will take an additional 5 minutes to load after a reboot or power-up and is not accessible during that time.
For Node-Red access
If you configured Ethernet as WAN, go to “Administration” and “Access Configuration” and for Node-Red verify both “via LAN” and “via WAN” are enabled.
“Submit” at the bottom of the screen then “Save & Restart”
After the Conduit is fully booted, wait an additional 5 minutes then try to access Node-Red.

-Best Regards

[Perico]

Thanks Steve, problem solved.

[Author]

Posts