Issue accessing the conduit

Home Forums Conduit: AEP Model Issue accessing the conduit

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #20849
    Charlie Lee
    Participant

    I selected DHCP client for the network configuration. How do I find out the address assigned to the Conduit?

    #20855
    Jeff Hatch
    Keymaster

    Charlie,

    There are a couple of ways to determine the IP. You could hook up the debug console port and use the ‘ifconfig’ command or if it is possible to get the assigned addresses from the DHCP server you could try that.

    Jeff

    #21521

    Another way is by network discovery tools like NMap. You scan the network and look for a machine/IP that isn’t assigned to any of your existing machines. I wouldn’t recommend this though in a professional/working environment, since it can raise some flags – either on AVs or if your network is monitored.

    This technique is also used to discover vulnerabilities – that’s the reason I recommend using it only in a personal or developing environment.
    The best and safest approach is the one that Jeff proposed.

    Best regards.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.