Image 3.3.13

Home › Forums › Conduit: mLinux Model › Image 3.3.13

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 25, 2017 at 5:34 am #21277
    Milan Babic
    Participant

    I have upgraded MTCAP to this image and after that I saw that there is no “lora-network-server” in init.d folder. After that I have returned to version 3.3.9.

    October 25, 2017 at 8:30 am #21280
    Jeff Hatch
    Keymaster

    Milan,

    How are you building the MTCAP firmware. What bitbake command are you using?

    Jeff

    October 25, 2017 at 9:00 am #21282
    John Klug
    Moderator

    Here is the Lora-network-server:

    http://www.multitech.net/mlinux/feeds/3.3.13/arm926ejste/lora-network-server_1.0.41-r1.0_arm926ejste.ipk

    Or if the device has internet access, you can edit /etc/opkg/mlinux-feed.conf to point at the mLinux level you wish (for instance there is a 3.3.14 package feed) and do opkg install lora-network-server.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.