How to config Duty Cycle for MDOT-868

Home › Forums › mDot/xDot › How to config Duty Cycle for MDOT-868

Tagged: 

Viewing 1 post (of 1 total)
  • Author
    Posts
  • February 18, 2019 at 10:08 pm #27272
    yunzhu tang
    Participant

    Hi, I am use MTDOT-868-X1-SMA, and will do the CE RF testing. For this we need to change the duty cycle to 100%. I use the command of “AT+MAC=0400”, and save use the command of “AT+SS”. It seems this can not configure it correctly. Could you share me the way to config the duty cycle to 100%.
    ————————————-
    Command and Response when testing
    ——-Start———–
    AT+MAC=0400

    OK

    AT+MAC=0400

    OK

    AT+MAC=0

    OK

    AT+MAC=0400

    OK

    AT+SS

    OK

    AT+TXF=868500000

    OK

    AT+TXP=12

    OK

    AT&W

    OK

    ATZ

    OK
    AT+SENDI=200,112233445566001122334455660
    No enabled channel
    No enabled channel
    No enabled channel
    No enabled channel
    No enabled channel
    No enabled channel
    ———end—————

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.