Flashing conduit to firmware

Home Forums Conduit: mLinux Model Flashing conduit to firmware

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #22494
    Kenneth Christensen
    Participant

    Hi
    I am following the instruction on howto flash my MLinux conduit back with origin firmware from here: http://www.multitech.net/developer/software/mlinux/using-mlinux/flashing-mlinux-firmware-for-conduit/

    I have a USB-stick in the front and interrupts the startup and are now in U-Boot.

    I have a connection to my TFTP server on my pc and now wants to excecute the script: “uboot-setenv-mtcdt.minicom” but I don’t know how to do that.

    I write: U-Boot>tftp 0x20000000 uboot-setenv-mtcdt.minicom
    And it reads in perfect.
    Then I write: U-Boot>source 0x20000000
    But that doesn’t work.
    What must I write to excecute the script? Should I use the command ‘CP’ instead – and how would I do that?

    Regards Kenneth

    #22503
    Jeff Hatch
    Keymaster

    Kenneth,

    What is your u-boot environment (output of print at the U-Boot> prompt)?

    Jeff

    #22553
    Kenneth Christensen
    Participant

    I got help from the support instead. I was helped to flash my conduit to an AEP device. Thanks Multitech!

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.