flash memory

Home Forums Dragonfly flash memory

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #16231
    Will Blight
    Participant

    A few quick question about the flash memory on the dragonfly.
    I have used the sample code to store data in the flash memory.

    Where is the data actually stored? I see from the code that is uses an SPI port.
    How much memory is available?

    Thanks,
    Will.

    #16232
    Mike Fiore
    Blocked

    Will,

    Are you referring to the Dragonfly Filesystem Example program?

    https://developer.mbed.org/teams/MultiTech/code/Dragonfly_Filesystem_Example/

    The Dragonfly has a 2MB external flash connected via SPI.

    Cheers,

    Mike

    #16233
    Will Blight
    Participant

    Hi Mike,
    Yes that is the sample code I was referring to. I used the link button to embed the link in my original post but it did not show up in the actual post.

    That is the answer I was looking for.
    Thanks.

    #16257
    Will Blight
    Participant

    Hi Mike,
    Could you provide the part number on the Flash IC. I’d like to look at the datasheet to see the current requirements. Our app runs off of a battery and I would to determine just how much more current the flash will use.

    Thanks,
    Will.

    #16258
    Mike Fiore
    Blocked

    M25P16.

    Cheers,
    Mike

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.