Conduit AEP With GPS Antenna

Home Forums Conduit: AEP Model Conduit AEP With GPS Antenna

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #28325

    Im trying to setup GPS on my Conduit AEP. I attached the Antenna to the antenna port and logged into the unit, went to Setup > GPS but I don’t know what the settings should be.
    I found a link to GPS and AEP quick start on the forum but the link was broken.

    Any help is appreciated.

    #28340
    Steve Kovarik
    Moderator

    Hi Robert

    The GPS antenna will need a clear view of the sky to work.
    If “TCP Server” is selected, then submitted and “save & restarted”
    Then to get coordinates use a TCP Client like Putty and initiate a
    raw TCP Socket to the IP Address of the Conduit on the defined port
    (port 5445 is default)
    If “TCP/UDP Client” is selected, then GPS coordinates will be sent to a
    TCP/UDP Server (Remote Host) on the defined port over the configured WAN port.
    The NMEA Configuration defines which NMEA sentences are sent.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.