Can´t open Conduit AP

Home Forums Conduit: mLinux Model Can´t open Conduit AP

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #28189
    Carsten Fosvang
    Participant

    I try to open into the Conduit AP via Ethernet, using 192.168.2.11 on IPV4
    and accessing the 192.168.2.1 on the browser. DHCP disconnected.
    Trying also the Putty with no result.
    Any god advice?

    #28190

    Hi,

    if you’re using Windows: change your network setting like you did and disable / enable the network adapter.
    It should work with putty like this.

    If you’re using linux:
    ssh mtadm@192.168.2.1 (if you’re using mtadm)

    I always set the ipv4 to 192.168.2.2 but that shouldn’t change anything.

    Cheers

    #28331
    ar.ghods@gmail.com
    Participant

    I also have this issue. It happens randomly!! I tested it with Linux and Windows machines. Sometimes re-plugging ethernet would help, but not always.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.